Efergy Additional Sensor

Additional sensor for use with the Efergy Smart Meter, Efergy Elite and Efergy 2 Elink wireless electricity monitors - only required for 2 and 3 phase installations and economy 7.

RRP: £9.95 You Save: £2.50 (25%)
£7.45 (Inc. VAT)

Select Efergy Model: Efergy Elite / Efergy 2 ElinkOriginal Efergy Smart Meter

Qty:

Click on Pictures to Enlarge                     UK Delivery See Below

Product Info :   

Additonal sensors can easily be plugged into any spare socket of the three available on the Efergy transmitter. 

The Efergy Elite and Efergy 2 Elink are both supplied with one standard clip on sensor which is all that is needed for a single phase supply (nearly all domestic supplies are single phase).

One additional sensor is required for a 2 phase or economy seven installation.

Two additional sensors are required for a 3 phase installation.

These standard additional sensors are suitable for cable with an insulated outer diameter of up to 13mm (use on cables smaller than 13mm diameter is fine). If your require sensors for cables with a larger insulated outside diameter order Extra Large Efergy Sensors .

Efergy Compatability

The same sensors are used by the Efergy Elite and Efergy 2 Elink. The old model - the original Efergy Smart Meter uses a slightly different sensor. The sensor pictured above is the "old" type for the original Efergy. The new ones have an "earphone plug" type plug fitting and may vary in colour and appearance from the picture above. Please indicate which model you will be using your additional sensor(s) with when ordering using the drop down box above.

Delivery Charge

There is no additional delivery charge if one or two additional sensors are ordered along with an Efergy Smart Meter. The delivery charge for a stand alone order for up to 7 additional sensors is £2.95 (incl VAT).